Motorola LM100 Provozní pokyny stáhnout pdf (Strana 30)

3-8 Installation and Setup

GX2-LM1000E* Installation and Operation Manual

Figure 3-7 illustrates a front view of the GX2-HSG* and the slots that guide the partially

inserted GX2-LM1000E*:

Figure 3-7

Inserting the GX2-LM1000E* in the GX2-HSG*

Power-Up and Reset Initialization

When the GX2-LM1000E* is fully installed in the GX2-HSG* and power is applied, the

initialization process begins. The GX2-LM1000E*

STATUS LED completes a red–yellow–green

cycle. Upon initial power-up of a new unit, the GX2-LM1000E* conforms to the factory default

Preset/Video mode with a 4 dB video mode offset from CW.

With subsequent power-ups, the status LED completes its power-on cycle, information stored in

the GX2-LM1000E* NVM is recalled, and the unit defaults to the last stored operating mode

before power was disrupted.

After initial power-up or subsequent power-ups, you can return the GX2-LM1000E* to the

factory default settings. You can do this through the SDU, the network management system, or

the local access port.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

Žádné komentáře

Motorola LM100 Provozní pokyny Strana 30