Motorola DCH3416 Instalační manuál stáhnout pdf (Strana 57)

4 DIAGNOSTICS

The Interface Status fields are:

Field Description

DOCSIS Tuner & Xmitter

Indicates if enabled; indicates if active

1394 I/O Device

Indicates if enabled; indicates if active

USB I/O Device

Indicates if enabled; indicates if active

Ethernet Device

Indicates if enabled; indicates if active

Parallel Port

Indicates if enabled; indicates if active

IR Xmit

Indicates if enabled; indicates if active

Hard Drive Status

Indicates if enabled; indicates if active

Smart Card

Indicates if enabled; indicates if active

HDMI Port

If a device is connected to the HDMI port only, the following diagnostics

display to help troubleshoot the HDMI interface. They all display “N/A” if no

device is connected to the HDMI port, or the value is invalid or cannot be

retrieved.

• Device Connected — Indicates whether a device is connected to

the HDMI port—Yes or No.

• Repeater — Indicates whether the connected device is a repeater

— Yes or No.

• Video Xmission (transmission) — Indicates whether the DCH3416

is transmitting video over the HDMI port — Not Active or Active.

• HDCP Enabled — Indicates whether the DCH3416 is using HDCP

to encrypt video transmitted over the HDMI link — Yes or No. If

the Video Xmission status is Not Active, the HDCP Enabled status

is No.

• Output Format — Indicates the timing format of the video sent

through HDMI:

1920 x 1080I — 1920 pixels wide by 1080 pixels high, interlaced

1280 x 720P — 1280 pixels wide by 720 pixels high, progressive

720 x 480P — 720 pixels wide by 480 pixels high, progressive

720 x 480I — 720 pixels wide by 480 pixels high, interlaced

640 x 480P — 640 pixels wide by 480 pixels high, progressive

• Aspect Ratio — Indicates the aspect ratio of the video sent

through HDMI — 4:3 or 16:9.

EDID Data

Indicates the video timing formats that were read from the Extended

Display Identification Data (EDID) register for the connected device, in

particular the detailed timing description blocks. The list displays all of the

formats that the DCH3416 could read, up to a maximum of 12 formats. If

the DCH3416 cannot read any formats, EDID Data is blank. An asterisk (*)

after the aspect ratio means the DCH3416 supports the format. If more

than twelve video timing formats are discovered, the supported formats

only are listed first, followed by up to twelve remaining formats.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Komentáře k této Příručce

Žádné komentáře

Motorola DCH3416 Instalační manuál Strana 57

Komentáře k této Příručce