Motorola CPCI-6115 Servisní příručka stáhnout pdf (Strana 66)

CPX8216 and CPX8216T Installation and Use (6806800A52C)

Chapter 6 Chassis Operations

Note The voltage on the rating label adjacent to the power receptacle must agree with the type

of line or cord and the applied voltage.

4. Flip the rocker switch in the rear of the chassis to | (ON).

Recommended Power-Off Procedure

To shut down your CPX8216 chassis, follow these steps.

1. Shut down all software operations and the operating system. For dual-configured chassis, both

domains must be shut down.

2. Flip the rocker switch in the rear of the chassis to O (OFF).

This removes input power for all the power supplies. In dual-configured chassis, both domains

will lose input power.

Emergency Power-Off Procedure

Caution

Performing this step results in a loss of data and may cause damage to chassis

components in a running chassis. Use the following step only when normal shutdown

procedures cannot be followed.

This step applies to both AC and DC chassis.

In the event of an emergency, flip the rocker switch in the rear of the chassis to O (OFF). This

removes input power from the power supplies and will result in an abnormal shutdown of the

chassis.

Controls and Indicators

This section describes the various locations and functions of the controls and indicators of the

CPX8216 chassis. The controls and indicators for the various CompactPCI modules available

for the platform are not covered in this section, refer to Chapter 3, Platform Description for this

information.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 173 174

Žádné komentáře

Motorola CPCI-6115 Servisní příručka Strana 66