Motorola WE800G - Wireless EN Bridge Uživatelská příručka stáhnout pdf (Strana 22)

INSTALLATION SECTION 2

SECTION 2, INSTALLATION

2-7

If you don’t want to use the Installation Wizard from the CD-ROM,

follow the instructions below. For advanced configurations, refer to

Section 3:Configuration.

Wired Connection to Access Point

LAN

Antenna

Reset

Power

This section applies if you are connecting your PC with an Ethernet

cable to the Access Point. Your PC must be installed first with an

Ethernet adapter.

You need one Ethernet cable for this procedure, to connect the PC to the Access

Point.

1 Using the supplied Ethernet cable, connect one end of the cable

to your PC’s Ethernet adapter and the other end to the LAN port

on the Access Point. You are now able to configure the Access

Point.

2 To configure the initial settings of the Access Point, please see

Configure your Computers.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 69 70

Žádné komentáře

Motorola WE800G - Wireless EN Bridge Uživatelská příručka Strana 22