Motorola MICOM-2ES Specifikace Strana 50

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 56
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 49
To connect a dipole or long-wire antenna:
1. Turn the transceiver off.
2. Open the harness envelope, to reach the coaxial cable
interconnecting the RF connectors of the transceiver and the ATU.
3. Disconnect the cable from the transceiver RF connector.
4. Connect the coaxial feed of the antenna directly to the transceiver RF
connector.
5. You may now disassemble the whip antenna (see Chapter 2).
6. Close the harness envelope. You may now operate the transceiver
with the dipole or long-wire antenna.
To return the transceiver to regular operation (with whip
antenna):
Reconnect the ATU to the transceiver and reinstall the whip antenna
by reversing the procedure given above.
A-2
Zobrazit stránku 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Komentáře k této Příručce

Žádné komentáře