Motorola Netopia Embedded Software Specifikace stáhnout pdf (Strana 178)

100

101

Administrator’s Handbook

178

Example: You want packets with the TOS low latency bit to go

through VC 2 (via gateway 127.0.0.3 – the Motorola Netopia®

Gateway will use 127.0.0.x, where x is the WAN port + 1) instead

of your normal gateway.

You would set up the ﬁlter as shown here.

☛ NOTE:

Default Forwarding Filter

If you create one or more ﬁlters that have a matching action of forward, then action on a

packet matching none of the ﬁlters is to block any trafﬁc.

Therefore, if the behavior you want is to force the routing of a certain type of packet and pass

all others through the normal routing mechanism, you must conﬁgure one ﬁlter to match the

ﬁrst type of packet and apply Force Routing. A subsequent ﬁlter is required to match and for-

ward all other packets.

Management IP trafﬁc

If the Force Routing ﬁlter is applied to source IP addresses, it may inadvertently block commu-

nication with the router itself. You can avoid this by preceding the Force Routing ﬁlter with a ﬁl-

ter that matches the destination IP address of the Gateway itself.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 367 368

Komentáře k této Příručce

Žádné komentáře

Motorola Netopia Embedded Software Specifikace Strana 178

Komentáře k této Příručce

Související produkty a manuály pro Směrovače Motorola Netopia Embedded Software