Motorola VT1000 Uživatelská příručka stáhnout pdf (Strana 25)

VT1000v Series Voice Terminal User Guide

Basic Configuration

To perform basic configuration:

1 On a computer connected to the voice terminal PC port or a router, start a Web

browser such as Microsoft

Internet Explorer or Netscape Navigator

2 In the Address or Location field, type http://192.168.102.1 and press ENTER to

display the Status page, which displays the Motorola voice terminal settings.

3 Click Basic Configuration to display the Basic Configuration window. Its fields are:

Obtain IP

Address

Dynamically

This setting is enabled by default. If either of the following is true, no

configuration on this page is required:

■

If you have a cable modem with no router and your cable provider

assigns IP addresses dynamically, the Motorola voice terminal

obtains its IP address dynamically from your cable provider.

■ If you have a router with DHCP enabled, the Motorola voice

terminal obtains its IP address dynamically from your router.

Specify Static

IP Address

If your broadband provider requires a static IP address, enable

Specify Static IP Address. Type the Static IP Address and IP

addresses for the Subnet Mask, Default Gateway they provide.

Enable PPPoE If you have a DSL modem and no router, enable PPPoE and type the

Service Name, User Name, and Password provided by your

DSL provider.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Žádné komentáře

Motorola VT1000 Uživatelská příručka Strana 25