Motorola AT Commands G24-L Technické informace Strana 120

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 522
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 119
Call Control
3-44 AT Commands Reference Manual January 31, 2007
+CLCC, List Current Calls
This command displays a list of all current G24 calls and their statuses, and also enables/disables
the unsolicited indication of the call list. (If no calls are received, no information response is sent
to the terminal.)
If the command succeeds but no calls are available, no information response is sent to the
terminal.
The maximum number of simultaneous multiparty calls is 5+1 (5 in active group and 1 on hold).
Command
Type
Syntax Response/Action Remarks
Set
AT+CLCC=<state> OK
or:
+CME ERROR: <err>
The Set command enables/disables
unsolicited indications.
Execute
AT+CLCC +CLCC: <idx>,<dir>,<call
state>, <mode>,
<mpty>[,<number>,<type>,
<alpha>]
[<CR><LF>+ CLCC:
<idx>,<dir>,<call state>,
<mode>,<mpty>[,<number>
,<type>,<alpha>]
[…]]
OK
The Execute command enables
the receiving of data about
current calls.
Read
AT+CLCC? +CLCC: <state>
OK
or:
+CME ERROR <err>
The Read command returns the call
status.
Test
AT+CLCC=? +CLCC: (List of supported
<state>s)
OK
or:
+CME ERROR <err>
Zobrazit stránku 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 521 522

Komentáře k této Příručce

Žádné komentáře