Motorola WS2000 - Wireless Switch - Network Management Device Specifikace Strana 216

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 346
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 215
9-2 WS2000 Wireless Switch System Reference Guide
9.1 Overview
When browsing web sites or sending E-mail messages a domain name is used. For example, the URL
www.yahoo.com and the e-mail address [email protected] contains the domain name yahoo.com. Domain
names allow users to remember the address to a site without knowing the IP address. For traffic to be routed
on a network those domain names must first be converted to an IP address. When a domain name is entered
the domain is translated to an IP address by a Domain Name Server (DNS).
DNS translation poses the following challenges:
There are a limited number of IP addresses currently available.
Domain names and IP addresses are created and changed everyday.
Dynamic Domain Name System (DDNS) enables you to link a domain name to a changing IP address. When
you connect to the Internet, your Internet service provider uses Dynamic Host Configuration Protocol (DHCP)
and assigns the domain an unused IP address from a set pool of IP addresses. This IP address is only used
for the duration of this specific connection. This method of dynamically assigning addresses, increases the
pool of available IP addresses.
The DDNS service maintains a database to connect a domain name to an IP address on the Internet. Because
the IP addresses change, it is necessary to update the DNS database with the current IP address for a given
domain name. The DDNS service performs these updates.
Enabling Dynamic DNS will allow domain name information to be updated when the IP address associated
with that domain changes. When a MU associates and gets and IP address from the DHCP server the DHCP
server then updates the DNS server with the IP allocated to the corresponding hostname.
9.2 Enabling DDNS
Dynamic DNS is configured on a per-subnet basis and requires the subnet to be configured as a DHCP Server.
DDNS is then enabled and configured in the Advanced DHCP Server screen for the corresponding subnet.
1. From the Subnet screen for the desired subnet select the This interface is a DHCP Server option.
Zobrazit stránku 215
1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 345 346

Komentáře k této Příručce

Žádné komentáře

Bionaire Filtres à air manuels d'utilisation

À partir de B

Cliquez sur un alphabet ci-dessous pour faire défiler la liste complète des modèles commençant par cette lettre

Modèles Type de document
BAP1550 - 2
Manuel d'instructions   Bionaire BAP1550 - 2 Instruction manual, 2 pages
BAP1700 - 2
Manuel d'instructions        Bionaire BAP1700 - 2 Instruction manual, 35 pages
BAP242
Manuel d'instructions   Bionaire BAP242 Instruction manual, 2 pages
BAP412 - 2
Manuel d'instructions        Bionaire BAP412 - 2 Instruction manual, 22 pages
Manuel d'instructions   Bionaire BAP412 - 2 Instruction manual [en] [fr] , 2 pages
Manuel de l'utilisateur   BIONAIRE BAP412 značky Bionaire - 176B22 - Å etříme, 3 pages
Manuel de l'utilisateur   BIONAIRE BAP412 značky Bionaire - 176B22 - Šetříme, 4 pages
BAP529
Instructions d'exploitation   Bionaire BAP529 Operating instructions, 10 pages
BAP725
Instructions d'exploitation       Bionaire BAP725 Operating instructions, 20 pages
BAP830
Manuel d'instructions        Bionaire BAP830 Instruction manual, 25 pages
BAP9240 - 2
Manuel d'instructions      Bionaire BAP9240 - 2 Instruction manual, 30 pages
BAP9424 - 2
Manuel d'instructions      Bionaire BAP9424 - 2 Instruction manual [en] , 30 pages
BAP9900UV-CN
Instructions d'exploitation    Bionaire BAP9900UV-CN Operating instructions, 2 pages