General Specifications
Dimensions: Desktop = 7˝ (18 cm) H x 18˝ (46 cm) W x 13˝
(33 cm) D [+ 4˝(10 cm) for cabling]
Weight: Maximum 7.7 kg (17 lbs)
Temperature Range: 0°C to +50°C
Humidity: 95% at 50C° (non-condensing)
Line Protection: Fast acting solid-state surge protection.
Memory Protection: Settings preserved in non-volatile memory.
Maximum Number of Remote: 10 parallel units (tone, DC, E&M)
31 parallel units (digital remote control)
End-to-End Specifications
Frequency Response: 300 to 3300 Hz +1, –3 dB @ less than
2% distortion.
Hum and Noise: 65 dB below rated output at any port.
Cross Talk: Less than –65 dB at 0 dBm transmit level.
Level Control: Digital Automatic Gain Control (AGC)- Constant
output (< 3 dB change) for all voice input levels
over the rated range:
Microphone: –60 to –22 dBm
Receive Line: –40 to +11 dBm
Base Station Controls
Channel Control: Each channel can be separately configured for
E&M, Tone, DC control, or digital.
Tone Control: Guard tone and one function tone in the 300 to
3300 Hz range, frequency adjustable in 0.1 Hz
increments. Total tone duration adjustable from
0 to 60000 ms in 1 ms increments. Parallel status
update on function tones (550 to 2050 Hz in 100
Hz increments). Guard tone configurable for 2100
Hz, 2175 Hz, 2300 Hz, or 2325 Hz.
DC Control: 125V DC. Positive and negative currents
(0.5 to 12.5 mA in 0.5 mA increments).
Maximum loop resistance including base
station termination: 10K Ohms.
Digital Control 5000 feet aggregate cable length to junction box.
Transmit Line Outputs
Line Output: Adjustable from –40 to +11 dBm
Output Impedance: 600 Ohm or 10K Ohm
Receiver Line Inputs
Receive Sensitivity: Adjustable from –40 to +11 dBm.
Call Light Sensitivity: Adjustable from –5 to –32 dB, per receive
sensitivity.
Line Balance: 60 dB @ 1004 Hz
Input Impedance: 600 Ohm or 10K Ohm
© 2000 Motorola, Inc. All Rights reserved
Specifications subject to change without notice.
R3-13-2001A
Other Audio Ports
Recorder Port (per channel): The output shall consist of summed transmit/
receive audio of the channel with a 2175 Hz
filter. The output level is adjustable from
–40 to +11 dBm into 600 Ohm.
Recorder Port (per console): The output shall consist of mixed selected receive
audio (telephone and radio) and the operator's
transmit audio. A fixed nominal
output of –10 dBm into 600 Ohm.
Auxiliary/Paging Input: Adjustable from –40 to +11 dBm, balanced
600 Ohm input.
Audio Controls
Individual Volume: 0 to –21 dB in 8 discrete 3 dB steps. Muting con-
figurable for –24 dB or full mute.
All Mute: 24 dB or full muting of unselected channels with
timer programmable from 1 to 120
seconds or for infinite duration.
Status Outputs and Inputs
Panel Indicators: Solid state LED indicators. Red, yellow, green
depending on function.
PTT Relay: Form A dry closure. 150 mA, 60 VDC
non-inductive load.
Auxiliary Outputs: Form C dry closures. 150 mA, 60 VDC
non-inductive load.
Auxiliary Inputs: Opto-coupled inputs, 5K Ohms impedance,
5 to 20 MA input current, unbalanced.
Power Supply
AC Input Voltage: 110-240 VAC, 6A maximum
Input Frequency: 50/60 Hz, +/– 3Hz
Power Output: 110 watt maximum
DC Outputs: V1 +5 Vdc @ 10 amps
V2 –5 Vdc @ 1 amp
V3 +12 Vdc @ 5.0 amps
V4 –12 Vdc @ 1.0 amp
Agency Approvals: UL (Underwriters Laboratories)
CSA (Canadian Standards Association)
CE Mark (Conformite Europeenne)
CommandSTAR Lite™
Motorola U.S.A. Motorola Canada Limited
1301 E. Algonquin Road 3900 Victoria Park Avenue
Schaumburg, Illinois 60196 North York, Ontario M2H 3H7
In the U.S. call: 1-888-567-7347 In Canada call: 1-800-268-5758
Outside the U.S. and Canada call: (847) 538-6602
, and Motorola are trademarks of Motorola.
Printed in U.S.A. (0102) VPS-C
Motorola is an Equal Employment Opportunity/Affirmative Action Employer
Komentáře k této Příručce