Motorola RS409 Uživatelská příručka Strana 23

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 118
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 22
Getting Started 1 - 7
Charging the Battery
Charging the Main Battery and Backup Battery
Before using the wearable terminal for the first time, charge the main battery until the amber Charge Status
LED remains lit (see Table 1-2 on page 1-7 for charge status indications).
The wearable terminal is equipped with a backup battery which automatically charges from the main battery
whether or not the wearable terminal is operating or is in suspend mode. The backup battery retains data in
memory for at least 15 minutes when the wearable terminal's main battery is removed or fully discharged.
When the wearable terminal is used for the first time or after the memory backup battery has fully discharged,
the backup battery requires approximately 15 hours to fully charge. Do not remove the main battery from the
wearable terminal for 16 hours to ensure that the memory backup battery fully charges. If the main battery is
removed from the wearable terminal or the main battery is fully discharged, the backup battery completely
discharges in several hours.
When the wearable terminal reaches a very low battery state, the combination of main battery and backup
battery retains data in memory for at least 24 hours.
Charge the wearable terminal with an installed main battery using either the Single Slot USB cradle or the Four
Slot Ethernet cradle.
To charge the main battery:
1. Ensure the cradle used to charge the main battery is connected to the appropriate power source.
2. Insert the wearable terminal into a cradle.
3. The wearable terminal starts to charge automatically. The amber Charge Status LED lights to indicate the
charge status. See Table 1-2 for charging indications. The standard capacity battery fully charges in less
than four hours and the extended battery fully charges in less than eight hours.
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page
6-3.
NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the
backup battery is fully charged, data may be lost.
Table 1-2
Wearable Terminal LED Charge Indicators
LED Indication
Off Wearable terminal is not in cradle. Wearable terminal not placed correctly. Charger is
not powered.
Fast Blinking Amber Charging error:
Temperature is too low or too high.
Charging has gone on too long without completing (typically eight hours).
Slow Blinking Amber
Wearable terminal
is charging.
Solid Amber Charging complete.
Note: When the battery is initially inserted in the
wearable terminal
, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
Zobrazit stránku 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 117 118

Komentáře k této Příručce

Žádné komentáře