Motorola MC75 - Worldwide Enterprise Digital Assistant Uživatelská příručka Strana 171

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 232
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 170
Accessories 7 - 27
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
Serial (RS232) Charge cable (9-pin D female with power input receptacle)
USB Client Charge cable (standard-A connector and a barrel receptacle for power)
Auto charge cable
DEX cable
Modem inverter cable
Charge only cable.
The following printer cables are available directly from Motorola:
O’Neil Printer cable
Zebra Printer cable.
Figure 7-29
Cables
Communication/charge cables:
Provide the MC75A with operating and charging power when used with the Motorola approved power supply.
Synchronize information between the MC75A and a host computer. With customized or third party software,
it can also synchronize the MC75A with corporate databases.
Provide serial connection through the serial pass-through port for communication with a serial device, such
as a host computer. For communication setup procedures, refer to the MC75A Integrator Guide.
Provide USB connection through the USB pass-through port for communication with a USB device, such as
a host computer. For communication setup procedures, refer to the MC75A Integrator Guide.
Dedicated printer cables provide communication with a printer.
Battery Charging and Operating Power
The communication/charge cables can charge the MC75A battery and supply operating power.
To charge the MC75A battery:
1. Connect the communication/charge cable power input connector to the Motorola approved power source.
Zobrazit stránku 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 231 232

Komentáře k této Příručce

Žádné komentáře