Motorola 2247-N8 Specifikace stáhnout pdf (Strana 24)

Administrator’s Handbook

More IP Subnets

When you click the More IP Subnets link, the Additional IP Subnets screen appears.

One subnet is preconfigured by default. The Additional IP Subnets screen allows you to configure up to seven

secondary subnets and their DHCP ranges, by entering IP address/subnet mask pairs:

☛ Note:

You need not use this screen if you have only a single Ethernet IP subnet.

◆ To add an IP subnet, enter the Gateway’s IP address on the subnet in the IP Address field and the subnet

mask for the subnet in the Netmask field.

◆ Enter the DHCP Start Address and End Address of the subnet range in their respective fields.

Ranges cannot overlap and there may be only one range per subnet.

If DHCP Server (see “DHCP Server” on page 23) is not enabled, the DHCP Start Address and DHCP End

Address fields do not appear.

◆ Click the Add this IP Subnet button. Your entries will be added to the IP Subnet List.

To Edit or Remove a configured subnet, click the respective icon in the list item. When you are finished, click the

Apply Changes button.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

Žádné komentáře

Motorola 2247-N8 Specifikace Strana 24