Motorola QIP7000 (P2) Series Instalační manuál stáhnout pdf (Strana 15)

Overview

QIP7000 (P2) Series Hybrid QAM/IP HD Set-top Terminal • Installation Manual 7

574702-001 a This document is uncontrolled pending incorporation in a Motorola CMS

Figure 4 – Rear panel

Table 3 – Rear panel connections

Lable Description

1 FiOS TV In — Connects to FiOS signal from your service provider

2 RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR

3 IEEE-1394 — Audio and video device connection

4 YPbPr — Component video output (HDTV)

5 Audio — Composite Audio L/R outputs

6 Video — Composite Video (SDTV) output

7 Digital Audio (RCA)* — Provides Dolby

Digital 5.1 audio or PCM output

8 Optical Audio (S/PDIF)* — Provides Dolby

Digital 5.1 audio or PCM output

9 S-Video — Connects to S-Video (SDTV) input of TV or VCR

10 IR Remote Input — Connects to a remote control set-top accessory cable

11 HDMI — High-Definition TV (HDTV) connector

12 eSATA* — External Serial ATA disk interface (QIP7200 Only)

13 Ethernet* — Network connection

14 USB* 2.0 — High-Speed peripheral device connection

15 Reserved – Service only

16 Power cord connector — switched accessory 2 prong AC outlet

*Feature is dependent upon application setting and availability in content

M-Card™

The M-Card is required to view television programs, previously recorded programs on

the DVR, or interactive on-demand programs. The M-Card should not be removed.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 85 86

Žádné komentáře

Motorola QIP7000 (P2) Series Instalační manuál Strana 15