Motorola Phaser P460 Specifikace stáhnout pdf (Strana 63)

4-3

Maintenance And Specifications

Scanned data is

incorrectly displayed on

the host.

Scanner is not

programmed to work

with the host.

Ensure the proper host type is selected.

Check the scanner host type parameters or

editing options:

• For RS-232, ensure the scanner’s

communication parameters match the

host’s settings.

The scanner emits

error beeps after

decoding a bar code.

Cradle is not powered

up or cable

connections are not

secure.

Check that the cradle is powered up and that its

cable connections are secure. See Setting Up the

Cradle on page 2-4.

Scanner is too far from

the base for proper

transmission.

Move closer to the base and retransmit.

Previously scanned

data not transmitted to

host.

Ensure you are within the proper RF transmission

range.

Received a

communication error

beep while using a

Synapse cable.

The cables connected

to the cradle were not

connected in the

correct sequence.

Before power is applied to the cradle, the

Synapse cable must be connected to the cradle

AND

the flying power lead plugged in. See Using

A Synapse Cable with the cradle on page 2-9 for

more information

Table 4-1. Troubleshooting Table (Continued)

Problem Possible Causes Possible Solutions

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 197 198

Komentáře k této Příručce

Žádné komentáře

Motorola Phaser P460 Specifikace Strana 63

Komentáře k této Příručce

Související produkty a manuály pro Čtečky čárových kódů Motorola Phaser P460